Are you looking for a Microsoft 70-417 exam questions? Are you looking for Microsoft 70-417 exam sample questions to identify gaps in your knowledge that may hurt you on the exam? GreatExam is your best choice! We are committed on providing you with the latest and most accurate 70-417 exam preparation material.
QUESTION 261
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and is configured as a standalone certification authority (CA).
You install a second server named Server2.
You install the Online Responder role service on Server2.
You need to ensure that Server1 can issue an Online Certificate Status Protocol (OCSP) Response Signing certificate to Server2.
What should you run on Server1?
A. The certreq.exe command and specify the -policy parameter
B. The certutil.exe command and specify the -getkey parameter
C. The certutil.exe command and specify the -setreg parameter
D. The certreq.exe command and specify the -retrieve parameter
Answer: C
QUESTION 262
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2.
You are configuring a storage space on Server1.
You need to ensure that the storage space supports tiered storage.
Which settings should you configure?
To answer, select the appropriate options in the answer area.
Answer:
QUESTION 263
Hotspot Question
You have a server that runs Windows Server 2012 R2 and has the iSCSI Target Server role service installed.
You run the New-IscsiVirtualDisk cmdlet as shown in the New-IscsiVirtualDisk exhibit.
(Click the Exhibit button.)
To answer, complete each statement according to the information presented in the exhibits.
Each correct selection is worth one point.
Answer:
QUESTION 264
Hotspot Question
Your network contains a DNS server named Server1 that runs Windows Server 2012 R2.
Server1 has a zone namedcontoso.com.
The network contains a server named Server2 that runs Windows Server 2008 R2.
Server1 and Server2 are members of an Active Directory domain named contoso.com.
You change the IP address of Server2.
Several hours later, some users report that they cannot connect to Server2.
On the affected users’ client computers, you flush the DNS client resolver cache, and the users successfully connect to Server2.
You need to reduce the amount of time that the client computers cache DNS records from contoso.com.
Which value should you modify in the Start of Authority (SOA) record? To answer, select the appropriate setting in the answer area.
Answer:
QUESTION 265
Your network contains two Active Directory forests named contoso.com and corp.contoso.com.
User1 is a member of the DnsAdmins domain local group in contoso.com.
User1 attempts to create a conditional forwarder to corp.contoso.com but receive an error message shown in the exhibit. (Click the Exhibit button.)
You need to configure bi-directional name resolution between the two forests.
What should you do first?
A. Add User1 to the DnsUpdateProxy group.
B. Configure the zone to be Active Directory-integrated.
C. Enable the Advanced view from DNS Manager.
D. Run the New Delegation Wizard.
Answer: D
QUESTION 266
Your network contains two Active Directory forests named contoso.com and adatum.com.
Each forest contains one domain. Contoso.com has a two-way forest trust to adatum.com.
Selective authentication is enabled on the forest trust.
Contoso contains 10 servers that have the File Server role service installed.
Users successfully access shared folders on the file servers by using permissions granted to the Authenticated Users group.
You migrate the file servers to adatum.com.
Contoso users report that after the migration, they are unable to access shared folders on the file servers.
You need to ensure that the Contoso users can access the shared folders on the file servers.
What should you do?
A. Disable selective authentication on the existing forest trust.
B. Disable SID filtering on the existing forest trust.
C. Run netdom and specify the /quarantine attribute.
D. Replace the existing forest trust with an external trust.
Answer: A
Explanation:
http://technet.microsoft.com/nl-nl/library/cc755321%28v=ws.10%29.aspx
Impact of Selective Authentication
Because all verification of incoming interforest authentication requests is done locally on the receiving domain controller in the trusting forest, access to resources in the trusting forest is likely to be extremely limited for a broad set of users on the network (which is the purpose of this security setting). Consequently, implementing selective authentication might require user education, particularly due to the following reasons:
Users browsing network resources through My Network Places to resources located in a trusting forest might get access denied messages when attempting to access those resources.
Resources in the trusting forest that were once available to users in a trusted forest might no longer be available.
QUESTION 267
Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 and Server2 are configured as shown in the following table.
You need to ensure that when new targets are added to Server1, the targets are registered on Server2 automatically.
What should you do on Server1?
A. Configure the Discovery settings of the iSCSI initiator.
B. Configure the security settings of the iSCSI target.
C. Run the Set-Wmilnstance cmdlet.
D. Run the Set-IscsiServerTarget cmdlet.
Answer: C
Explanation:
http://blogs.technet.com/b/filecab/archive/2012/06/08/iscsi-target-cmdlet-reference.aspx
11.Manage iSNS server registration
The iSNS server registration can be done using the following cmdlets, which manages the WMI objects.
To add an iSNS server:
Set-WmiInstance -Namespace root\wmi -Class WT_iSNSServer –Arguments
@{ServerName=”ISNSservername”}
QUESTION 268
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012 R2.
You plan to install the Active Directory Federation Services server role on Server1 to allow for Workplace Join.
You run nslookup enterprise registration and you receive the following results:
You need to create a certificate request for Server1 to support the Active Directory Federation Services (AD FS) installation.
How should you configure the certificate request?
To answer, drag the appropriate names to the correct locations. Each name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 269
Drag and Drop Question
You have a server that runs Windows Server 2012 R2.
You create a new work folder named Share1.
You need to configure Share1 to meet the following requirements:
– Ensure that all synchronized copies of Share1 are encrypted.
– Ensure that clients synchronize to Share1 every 30 minutes.
– Ensure that Share1 inherits the NTFS permissions of the parent folder.
Which cmdlet should you use to achieve each requirement? To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 270
You have a virtual machine named VM1 that runs on a host named Host1.
You configure VM1 to replicate to another host named Host2. Host2 is located in the same physical location as Host1.
You need to add an additional replica of VM1. The replica will be located in a different physical site.
What should you do?
A. From VM1 on Host2, click Extend Replication.
B. On Host1, configure the Hyper-V settings.
C. From VM1 on Host1, click Extend Replication.
D. On Host2, configure the Hyper-V settings.
Answer: A
Explanation:
http://blogs.technet.com/b/virtualization/archive/2013/12/10/hyper-v-replica-extend-replication.aspx
Once that is done, go to replica site and from Hyper-V UI manager select the VM for which you want to extend the replication. Right click on VM and select “Replication->Extend Replication”. This will open Extend Replication Wizard which is similar to Enable Replication Wizard.
http://technet.microsoft.com/en-us/library/dn551365.aspx
http://technet.microsoft.com/en-us/library/jj134240.aspx
NOTE: You configure a server to receive replication with Hyper-V Manager, in this situation the replica site is assumed to be the Replica Server.
Therefore you extend replication from VM1 on Host2.
QUESTION 271
Your network contains an Active directory forest named contoso.com. The forest contains two child domains named east.contoso.com and west.contoso.com.
You install an Active Directory Rights Management Services (AD RMS) cluster in each child domain.
You discover that all of the users in the contoso.com forest are directed to the AD RMS cluster in east.contoso.com.
You need to ensure that the users in west.contoso.com are directed to the AD RMS cluster in west.contoso.com and that the users in east.contoso.com are directed to the AD RMS cluster in east.contoso.com.
What should you do?
A. Modify the Service Connection Point (SCP).
B. Configure the Group Policy object (GPO) settings of the users in the west.contoso.com domain.
C. Configure the Group Policy object (GPO) settings of the users in the east.contoso.com domain.
D. Modify the properties of the AD RMS cluster in west.contoso.com.
Answer: B
Explanation:
The west.contoso.com are the ones in trouble that need to be redirected to the west.contoso.com not the east.contoso.com.
QUESTION 272
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
You have a failover cluster named Cluster1 that contains two nodes named Server1 and Server2. Both servers run Windows Server 2012 R2 and have the Hyper-V server role installed.
You plan to create two virtual machines that will run an application named App1. App1 will store data on a virtual hard drive named App1data.vhdx.
App1data.vhdx will be shared by both virtual machines.
The network contains the following shared folders:
– An SMB file share named Share1 that is hosted on a Scale-Out File Server.
– An SMB file share named Share2 that is hosted on a standalone file server.
– An NFS share named Share3 that is hosted on a standalone file server.
You need to ensure that both virtual machines can use App1data.vhdx simultaneously.
What should you do? To answer, select the appropriate configurations in the answer area.
Answer:
QUESTION 273
Your network contains an Active Directory domain named contoso.com.
The domain contains a server named Server1 that runs Windows Server 2012.
Server1 is the enterprise root certification authority (CA) for contoso.com.
You need to enable CA role separation on Server1.
Which tool should you use?
A. The Certutil command
B. The Authorization Manager console
C. The Certsrv command
D. The Certificates snap-in
Answer: A
Explanation:
http://technet.microsoft.com/en-us/library/cc773161(v=ws.10).aspx
certutil -setreg ca\RoleSeparationEnabled 1
QUESTION 274
Your network contains two Web servers named Server1 and Server2.
Both servers run Windows Server 2012 R2.
Server1 and Server2 are nodes in a Network Load Balancing (NLB) cluster.
The NLB cluster contains an application named App1 that is accessed by using the URL http://app1.contoso.com.
You plan to perform maintenance on Server1.
You need to ensure that all new connections to App1 are directed to Server2.
The solution must not disconnect the existing connections to Server1.
What should you run?
A. The Set-NlbCluster cmdlet
B. The Set-NlbClusterNode cmdlet
C. The Stop-NlbCluster cmdlet
D. The Stop-NlbClusterNode cmdlet
Answer: D
The Stop-NlbClusterNode cmdlet stops a node in an NLB cluster. When you use the stop the nodes in the cluster, client connections that are already in progress are interrupted.
To avoid interrupting active connections, consider using the -drain parameter, which allows the node to continue servicing active connections but disables all new traffic to that node.
-Drain <SwitchParameter>
Drains existing traffic before stopping the cluster node. If this parameter is omitted, existing traffic will be dropped.
QUESTION 275
Your network contains an Active Directory domain named contoso.com.
All user accounts reside in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1.
You link GPO1 to OU1.
You configure the Group Policy preference of GPO1 to add a shortcut named Link1 to the desktop of each user.
You discover that when a user deletes Link1, the shortcut is removed permanently from the desktop.
You need to ensure that if a user deletes Link1, the shortcut is added to the desktop again.
What should you do?
A. Modify the Link1 shortcut preference of GPO1.
B. Enable loopback processing in GPO1.
C. Enforce GPO1.
D. Modify the Security Filtering settings of GPO1.
Answer: A
QUESTION 276
Your network contains an Active Directory forest named contoso.com. The forest contains two sites named Main and Branch. The Main site contains 400 desktop computers and the Branch site contains 150 desktop computers. All of the desktop computers run Windows 8.
In Main, the network contains a member server named Server1 that runs Windows Server 2012.
You install the Windows Server Update Services server role on Server1.
You need to ensure that Windows updates obtained from Windows Server Update Services (WSUS) are the same for the computers in each site.
You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. From the Update Services console, create computer groups.
B. From the Update Services console, configure the Computers options.
C. From the Group Policy Management console, configure the Windows Update settings.
D. From the Group Policy Management console, configure the Windows Anytime Upgrade settings.
E. From the Update Services console, configure the Synchronization Schedule options.
Answer: C
Explanation:
Create one computer group for Main site and another group for Branch site.
You can deploy Windows updates by computer group.
QUESTION 277
You have a server named DNS1 that runs Windows Server 2012 R2.
You discover that the DNS resolution is slow when users try to access the company intranet home page by using the URL http://companyhome.
You need to provide single-label name resolution for CompanyHome that is not dependent on the suffix search order.
Which three cmdlets should you run? (Each correct answer presents part of the solution.
Choose three.)
A. Add-DnsServerPrimaryZone
B. Add-DnsServerResourceRecordCName
C. Set-DnsServerDsSetting
D. Set-DnsServerGlobalNameZone
E. Set-DnsServerEDns
F. Add-DnsServerDirectory Partition
Answer: ABD
Explanation:
*The Add-DnsServerPrimaryZone cmdlet adds a specified primary zone on a Domain Name System (DNS) server.
* The Add-DnsServerResourceRecordCName cmdlet adds a canonical name (CNAME) resource record to a specified Domain Name System (DNS) zone. A CNAME record allows you to use more than one resource record to refer to a single host *The Set-DnsServerGlobalNameZone cmdlet enables or disables single-label Domain Name System (DNS) queries.
It also changes configuration settings for a GlobalNames zone.
The GlobalNames zone supports short, easy-to-use names instead of fully qualified domain names (FQDNs) without using Windows Internet Name Service (WINS) technology.
For instance, DNS can query SarahJonesDesktop instead of SarahJonesDesktop.contoso.com.
QUESTION 278
Your network contains an Active Directory domain named adatum.com.
You have a standard primary zone named adatum.com.
You need to provide a user named User1 the ability to modify records in the zone.
Other users must be prevented from modifying records in the zone.
What should you do first?
A. Run the Zone Signing Wizard for the zone.
B. From the properties of the zone, change the zone type.
C. Run the new Delegation Wizard for the zone.
D. From the properties of the zone, modify the Start Of Authority (SOA) record.
Answer: B
Explanation:
Convert the standard primary zone to AD integrated zone -> The security tab will appear.
QUESTION 279
Your network contains a single Active Directory domain named contoso.com.
All domain controllers run Windows Server 2012 R2.
The domain contains 400 desktop computers that run Windows 8 and 10 desktop computers that run Windows XP Service Pack 3 (SP3).
All new desktop computers that are added to the domain run Windows 8.
All of the desktop computers are located in an organizational unit (OU) named OU1.
You create a Group Policy object (GPO) named GPO1.
GPO1 contains startup script settings. You link GPO1 to OU1.
You need to ensure that GPO1 is applied only to computers that run Windows XP SP3.
What should you do?
A. Create and link a WML filter to GPO1
B. Run the Set-GPInheritance cmdlet and specify the -target parameter.
C. Run the Set-GPLink cmdlet and specify the -target parameter.
D. Modify the Security settings of OU1.
Answer: A
Explanation:
WMI Filtering is used to get information of the system and apply the GPO on it with the condition is met. Security filtering: apply a GPO to a specific group (members of the group)
QUESTION 280
Your network contains an Active Directory domain named contoso.com.
Network Policy Server (NPS) is deployed to the domain.
You plan to deploy Network Access Protection (NAP).
You need to configure the requirements that are validated on the NPS client computers.
What should you do?
A. From the Network Policy Server console, configure a network policy.
B. From the Network Policy Server console, configure a health policy.
C. From the Network Policy Server console, configure a Windows Security Health Validator (WSHV) policy.
D. From a Group Policy object (GPO), configure the NAP Client Configuration security setting.
E. From a Group Policy object (GPO), configure the Network Access Protection Administrative Templates setting.
Answer: C
Our 70-417 dumps are rich in variety. We offer 70-417 PDF dumps, 70-417 practice test and 70-417 VCE dumps. We ensure you can pass the 70-417 easily. Welcome to GreatExam.com.
http://www.greatexam.com/70-417-exam-questions.html