web analytics

New Released Exam Dumps Free Download In Lead2pass

Updated Lead2pass PDF And VCE Dumps

[2016-New] Official Microsoft 70-457 Exam Preparation Download From GreatExam (101-120)

GreatExam gives the latest, authoritative and complete 70-457 braindumps for 70-457 exam, because of that, all of our candidates pass 70-457 certification without any problem. The biggest feature is the regular update of 70-457 PDF and VCE, which keeps our candidates’ knowledge up to date and ensures their 70-457 exam success.

QUESTION 101
You administer a Microsoft SQL Server 2012 database. The database contains a table named Employee. Part of the Employee table is shown in the exhibit. (Click the Exhibit button.)

 

1011
1012
Unless stated above, no columns in the Employee table reference other tables. Confidential information about the employees is stored in a separate table named EmployeeData.
One record exists within EmployeeData for each record in the Employee table.
You need to assign the appropriate constraints and table properties to ensure data integrity and visibility.
On which column in the Employee table should you a create a self-reference foreign key constraint?

A.    DateHired
B.    DepartmentID
C.    EmployeeID
D.    EmployeeNum
E.    FirstName
F.    JobTitle
G.    LastName
H.    MiddleName
I.    ReportsToID

Answer: I

QUESTION 102
You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that includes up-to-the-minute reporting requirements can be off-loaded from the primary database to another server.
You also need to be able to add indexes to the secondary database.
Which configuration should you use?

A.    Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.    Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
C.    Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
D.    Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.    Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
F.    SQL Server that includes an application database configured to perform transactional replication
G.    SQL Server that includes an application database configured to perform snapshot replication
H.     Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance

Answer: F
Explanation:
http://technet.microsoft.com/en-us/library/ms151738.aspx

QUESTION 103
You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that data changes are sent to a non-SQL Server database server in near real time.
You also need to ensure that data on the primary server is unaffected.
Which configuration should you use?

A.    SQL Server that includes an application database configured to perform transactional replication
B.    Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
C.    Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
D.    SQL Server that includes an application database configured to perform snapshot replication
E.    Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
F.    Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.    Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
H.    Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby

Answer: A

QUESTION 104
You administer all the deployments of Microsoft SQL Server 2012 in your company.
A database contains a large product catalog that is updated periodically.
You need to be able to send the entire product catalog to all branch offices on a monthly basis. Which configuration should you use?

A.    Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
B.     SQL Server that includes an application database configured to perform transactional replication
C.    Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
D.     Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
E.    SQL Server that includes an application database configured to perform snapshot replication
F.    Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
G.    Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
H.     Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode

Answer: E
Explanation:
http://msdn.microsoft.com/en-us/library/ms151832.aspx

QUESTION 105
You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting database. The transactional database is updated through a web application and is operational throughout the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
1051
The differential backup of the reporting database fails.
Then, the reporting database fails at 14:00 hours.
You need to ensure that the reporting database is restored.
You also need to ensure that data loss is minimal.
What should you do?

A.    Restore the latest full backup, and restore the latest differential backup.
Then, restore the latest log backup.
B.    Perform a point-in-time restore.
C.    Restore the latest full backup.
D.    Restore the latest full backup, and restore the latest differential backup.
Then, restore each log backup taken before the time of failure from the most recent differential backup.
E.    Restore the latest full backup.
Then, restore the latest differential backup.
F.    Restore the latest full backup.
Then, restore each differential backup taken before the time of failure from the most recent full backup.
G.    Perform a page restore.
H.    Perform a partial restore.

Answer: C

QUESTION 106
You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that uses a storage area network (SAN) remains available if any of the servers fail.
You also need to minimize the amount of storage used by the database.
Which configuration should you use?

A.    Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.    SQL Server that includes an application database configured to perform transactional replication
C.    Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
D.    Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.    Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
F.    Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.    SQL Server that includes an application database configured to perform snapshot replication
H.    Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance

Answer: H

QUESTION 107
You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting database. The transactional database is updated through a web application and is operational throughout the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
1071
At 14:00 hours, you discover that pages 71, 520, and 713 on one of the database files are corrupted on the reporting database.
You need to ensure that the databases are restored.
You also need to ensure that data loss is minimal. What should you do?

A.    Perform a partial restore.
B.    Restore the latest full backup, and restore the latest differential backup.
Then, restore each log backup taken before the time of failure from the most recent differential backup.
C.    Restore the latest full backup.
D.    Restore the latest full backup, and restore the latest differential backup.
Then, restore the latest
log backup.
E.    Perform a page restore.
F.    Restore the latest full backup.
Then, restore each differential backup taken before the time of failure from the most recent full backup.
G.    Perform a point-in-time restore.
H.    Restore the latest full backup.
Then, restore the latest differential backup.

Answer: H

QUESTION 108
You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting database. The transactional database is updated through a web application and is operational throughout the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
1081
At 16:20 hours, you discover that pages 17, 137, and 205 on one of the database files are corrupted on the transactional database.
You need to ensure that the transactional database is restored.
You also need to ensure that data loss is minimal.
What should you do?

A.    Perform a partial restore.
B.    Restore the latest full backup, and restore the latest differential backup.
Then, restore each log backup taken before the time of failure from the most recent differential backup.
C.    Perform a point-in-time restore.
D.    Restore the latest full backup.
E.    Restore the latest full backup, and restore the latest differential backup.
Then, restore the latest log backup.
F.    Perform a page restore.
G.    Restore the latest full backup.
Then, restore each differential backup taken before the time of failure from the most recent full backup.
H.    Restore the latest full backup.
Then, restore the latest differential backup.

Answer: F

QUESTION 109
You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting database. The transactional database is updated through a web application and is operational throughout the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
1091
One of the hard disk drives that stores the reporting database fails at 16:40 hours.
You need to ensure that the reporting database is restored.
You also need to ensure that data loss is minimal.
What should you do?

A.    Restore the latest full backup.
Then, restore each differential backup taken before the time of failure from the most recent full backup.
B.    Perform a partial restore.
C.    Restore the latest full backup, and restore the latest differential backup.
Then, restore the latest log backup.
D.    Perform a point-in-time restore.
E.    Restore the latest full backup.
F.    Perform a page restore.
G.    Restore the latest full backup, and restore the latest differential backup.
Then, restore each log backup taken before the time of failure from the most recent differential backup.
H.     Restore the latest full backup.
Then, restore the latest differential backup.

Answer: G

QUESTION 110
Drag and Drop Question
You administer three Microsoft SQL Server 2012 servers named ServerA, ServerB, and ServerC. ServerA is the acting principal and ServerB is the mirror.
You need to add ServerC as a witness to the existing mirroring session between ServerA and ServerB.
You need to achieve this goal without delaying synchronization.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
1101
Answer:
1102

QUESTION 111
You administer a Microsoft SQL Server 2012 database.
You create an availability group named haContosoDbs.
Your primary replica is available at Server01\Contoso01.
You need to configure the availability group to have the highest availability.
You also need to ensure that no data is lost.
Which Transact-SQL statement should you use?
1111

A.    Option A
B.    Option B
C.    Option C
D.    Option D

Answer: C

QUESTION 112
Drag and Drop Question
You administer several Microsoft SQL Server 2012 servers.
Your company has a number of offices across the world connected by using a wide area network (WAN). Connections between offices vary significantly in both bandwidth and reliability.
You need to identify the correct replication method for each scenario.
What should you do? (To answer, drag the appropriate replication method or methods to the correct location or locations in the answer area. Each replication method may be used once, more than once, or not at all.)
1121
Answer:
1122

QUESTION 113
Drag and Drop Question
You administer two Microsoft SQL Server 2012 servers named ServerA and ServerB.
You use a database named AdventureWorks.
You need to prepare the AdventureWorks database for database mirroring.
ServerB will act as the mirror in a mirroring partnership along with ServerA.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
1131
Answer:
1132

QUESTION 114
You create an availability group named HaContoso that has replicas named Server01/HA, Server02/HA, and Server03/HA. Currently, Server01l/HA is the primary replica.
You need to ensure that the following requirements are met:
– Backup operations occur on Server02/HA.
– If Server02/HA is unavailable, backup operations occur on Server03/HA.
– Backup operations do not occur on Server01/HA.
How should you configure HaContoso?

A.    Set the backup preference of HaContoso to Prefer Secondary.
Set the backup priority of Server02/HA to 20.
Set the backup priority of Server03/HA to 10.
B.     Set the backup preference of HaContoso to Secondary only.
Set the backup priority of Server02/HA to 20.
Set the backup priority of Server03/HA to 10.
C.    Set the backup preference of HaContoso to Secondary only.
Set the backup priority of Server02/HA to 10.
Set the backup priority of Server03/HA to 20.
D.     Set the exclude replica of Server01/HA to true.
Set the backup priority of Server02/HA to 10.
Set the backup priority of Server03/HA to 20.

Answer: B

QUESTION 115
Drag and Drop Question
You administer a Microsoft SQL Server 2012 environment that contains a production SQL Server 2005 instance named SQL2005 and a development SQL Server 2012 instance named SQL2012. The development team develops a new application that uses the SQL Server 2012 functionality. You are planning to migrate a database from SQL2005 to SQL2012 so that the development team can test their new application.
You need to migrate the database without affecting the production environment.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
1151
Answer:
1152
Explanation:
Because the test question specifically states that the goal is to test the application with sql server 2012. Setting the compatibility level to something earlier defeats the purpose.  Since we read the documentation carefully, we note that the compatibility level is what?
“an interim migration aid to work around version differences in the behaviors that are controlled by the relevant compatibility-level setting. If existing SQL Server applications are affected by behavioral differences in SQL Server 2012, convert the application to work properly.”
So we set the compatibility level to 110 to test, find all the issues, set it to a lower value as a TEMPORARY workaround while we find solutions to all of the issues, set it back to 110 for final testing and release.
http://msdn.microsoft.com/en-us/library/ms177429.aspx

QUESTION 116
Drag and Drop Question
You administer three Microsoft SQL Server 2008 R2 instances. Database mirroring is configured in High-Safety mode with Automatic Failover between the following three servers:
– SQL1 is the Principal server.
– SQL2 is the mirror server.
– SQL3 is the witness server.
You need to upgrade SQL1 and SQL2 to SQL Server 2012.
You need to ensure that downtime is minimized during the upgrade.
Which six actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)
1161
Answer:
1162

QUESTION 117
Hotspot Question
You administer a Microsoft SQL Server 2012 database.
The database contains a table that has the following definition:
1171
You want to export data from the table to a flat file by using the SQL Server Import and Export Wizard.
You need to ensure that the following requirements are met:
– The first row of the file contains the first row of data.
– Each record is of the same length.
– The date follows the U.S. date format.
– The file supports international characters.
What should you do? (To answer, configure the appropriate option or options in the dialog box in the answer area.)
1172
Answer:
1173

QUESTION 118
You administer a Microsoft SQL Server 2012 server. When transaction logs grow, SQL Server must send an email message to the database administrators.
You need to configure SQL Server to send the email messages.
What should you configure?

A.    SQL Mail
B.    An Extended Events session
C.    Alerts and operators in SQL Server Agent
D.    Policies under Policy-Based Management

Answer: C

QUESTION 119
You administer a Microsoft SQL Server 2012 database. The database has a table named Customers owned by UserA and another table named Orders owned by UserB.
You also have a stored procedure named GetCustomerOrderInfo owned by UserB. GetCustomerOrderInfo selects data from both tables.
You create a new user named UserC.
You need to ensure that UserC can call the GetCustomerOrderInfo stored procedure.
You also need to assign only the minimum required permissions to UserC.
Which permission or permissions should you assign to UserC? Choose all that apply.

A.    The Select permission on Customers
B.    The Execute permission on GetCustomerOrderInfo
C.    The Take Ownership permission on Customers
D.    The Control permission on GetCustomerOrderInfo
E.    The Take Ownership permission on Orders
F.    The Select permission on Orders

Answer: AB
Explanation:
The question seems to be missing something. Or the original answer is incorrect. I’ve changed it to what I believe to be the correct answer. The original answer included “The Select permission on Orders.”, but due to ownership chaining, you would only need to give Execute permissions to
UserC to access the Orders table since UserB is the owner.
http://msdn.microsoft.com/en-us/library/ms188676.aspx
http://stackoverflow.com/questions/2212044/sql-server-how-to-permission-schemas
http://sqlservercentral.com/blogs/steve_jones/2012/03/14/ownership-chains-in-sql-server

QUESTION 120
You administer a Microsoft SQL Server 2012 server.
The MSSQLSERVER service uses a domain account named CONTOSO\SQLService.
You plan to configure Instant File Initialization.
You need to ensure that Data File Autogrow operations use Instant File Initialization.
What should you do? Choose all that apply.

A.    Restart the SQL Server Agent Service.
B.    Disable snapshot isolation.
C.    Restart the SQL Server Service.
D.    Add the CONTOSO\SQLService account to the Perform Volume Maintenance Tasks local security policy.
E.    Add the CONTOSO\SQLService account to the Server Operators fixed server role.
F.    Enable snapshot isolation.

Answer: CD
Explanation:
http://msdn.microsoft.com/en-us/library/ms175935.aspx
http://www.mssqltips.com/sqlservertip/2752/effect-of-instant-file-initialization-within-sql-server/

Get latest GreatExam 70-457 practice test and pass your exam easily. Passing the test is not so difficult now, you can easily pass the exam with our correct and accurate collection of GreatExam 70-457 question answers.

http://www.greatexam.com/70-457-exam-questions.html